Eclipse - Fujitsu Ten CD5444 - Manual (Page 134)

134
If you have a question:
Displayed information (for troubleshooting)
The information listed in the chart below is displayed to show the
status of the CD, Memory Stick player and CD changer. Refer to the
chart for the appropriate action.
INFO 2 NO DISC LOADED IN
THE MAGAZINE
There is no disc in the magazine or player. Load a
disc in the magazine. (Load a music disc.)
Information Contents Explanation and remedial action to take
INFO 3 DISCS ARE DIRTY OR
DAMAGED
The loaded disc is dirty or upside down. Check it
for proper orientation and verify it is clean.
INFO 5 CD PLAYER AND CD
CHANGER FAILS
MECHANICALLY
•The CD player and CD changer is inoperative for
some reason. Go through the magazine removal
procedure.
•If a magazine fails to eject, have your dealer fix
problem.
INFO 6 WHEN THE CD
CHANGER INTERNAL
TEMPERATURE IS
HIGH (TO PROTECT
PICKUP UNIT)
•The temperature in the CD changer is too high for
operation. Wait till it cools down.
•Resume playing after the “High temperature
sensed and CD stopped" display disappears. If
the CD still cannot play, have your dealer repair it.
INFO 7 AN INTERNAL POWER
SUPPLY FAILURE IS
OCCURRING WITH
THE AUTO CHANGER
•Turn the ACC off once before turning it on once
again to resume the operation.
•If the function still cannot be restricted, contact
your dealer.
LOAD CD changer is in the process of verifying the
presence of CDs after a magazine has been
inserted into the CD changer.