Eclipse - Fujitsu Ten CD5444 - Manual (Page 32)

32
ESN security operating procedure
Press the [FUNC] button for more than one second.
If the security code matches the code recorded by the
deck, [OK] will appear on the display and the security
function will be canceled. 3
ATTENTION
•If the security code does not match the information recorded
by the deck, [ERR_] (ERR and the error number) will appear on
the display for two seconds, and then [- - - -] (security code
entry display) will appear. If this happens, check the security
code and repeat the procedure from step 2.
•If [ERR5] (the 5th time an error has occurred) appears, [HELP]
will appear. When [HELP] appears, carry out the operations for
an ESN security lock out by following the procedure in " What
happens if a Memory Stick or security code is incorrect?" on
page 34.
[DISC] button
Canceling ESN security lock using Memory Stick
After the battery is connected and the deck's power is
turned on, [SEC] will appear on the display for two
seconds. After this, [- - - -] (security code entry display)
will appear.
Press the [DISC] button.
[MS] will appear on the display. If you press the [DISC]
button once more, the display will return to [- - - -] (security
code entry display). 2
1
ATTENTION
If a Memory Stick has already been inserted, a [MS EJECT]
message appears. In this case, eject the Memory Stick and
insert again. (Refer to "Ejecting the Memory Stick" on page 72 for
details on ejection of the Memory Stick.)
[FUNC] button