Eclipse - Fujitsu Ten CD5444 - Manual (Page 132)

132
Others
Connecting Portable Audio Players to the AUX Jack
Turn on the portable audio player and start its play
function.
1
Switch to AUX mode by pressing the [DISC] button for
more than one second.
2
Activation of the AUX mode will light the "AUX" indicator and
channel audio player output to the system speakers.
Use a commonly available accessory cord with stereo mini-plug to
connect the audio output jack (LINE) or headphone jack of a
portable audio player to the AUX (auxiliary) jack of this system.
Others
ATTENTION
•While the AUX mode is activated, actions such as turning off the
audio player or pulling out the connection cord may cause
noise spikes that can damage the system speakers. Be sure to
avoid this possibility by turning off system power or switching
from AUX mode to another mode before shutting off or
disconnecting the portable audio player.
•Audio output levels will differ for the various devices that can be
connected by this method. Carefully adjust volume until the
output level of the connected player is known.
•Before using a portable audio player in a vehicle, read the
player's operation manual carefully and confirm problem-free
operation in the vehicle before proceeding.
[DISC] button