Ericsson SATELLITE R290 User Manual
Page 61
R290 User’s Guide
53
3. Press
3
for Cancel, the display will show the options.
4. Press
2
to Cancel Incoming Call Bar. The display will show:
5. Press
1
for All Calls,
2
for Voice Only,
3
for Data Only,
4
for Fax
Only or
5
for Messages.
6. Enter network password and press
YES
.
If you do not have the password, contact your service provider for it. The
display will show the message ‘Request Accepted’, before returning to
stand-by. If the password is entered incorrectly, the message ‘Password
Error’ will be displayed on the screen.
To Change the Network Password (for Call Barring)
1. Press
SOFT LEFT
,
5
to enter Advanced menu.
2. Press
3
for Call Bar menu.
3. Press
4
for Password, the display will show:
4. Enter the old network password and press
YES
.
5. Enter the new network password and press
YES
.
6. Enter the new network password again to confirm and press
YES
.
If the new password and its confirmation do not match, the message
‘Password Confirmation Error’ will be given and you will be asked to
confirm the new password again. If your old password is entered
incorrectly the message ‘Password Error’ will be displayed.
Once a positive network response has been received, ‘New Password
Accepted’ will be displayed before the phone returns to stand-by.