Ericsson SATELLITE R290 - Manual (Page 35)

R290 User’s Guide
27
All Calls
1. Press SOFT LEFT , 2 , to enter the Call Time Menu.
2. Press 2 to display the duration and cost of all calls made. The time is
displayed in hours, minutes and seconds. The cost is displayed in the
chosen currency.
To Reset the Call Time/Cost Counters
1. Press SOFT LEFT , 2 , to enter the Call Time Menu.
2. Press 3 to reset the call time/cost counters.
NOTE:
If you are using a Phase 1 SIM, you will be required to enter the phone
PIN and press
YES . The time and cost counters will then be reset to zero
and a confirmation message of ‘Request Accepted’ will be displayed
before returning to stand-by.
If the phone PIN is entered incorrectly, an error message will be given and
a request to re-enter it. If it is entered incorrectly three times, you will not
be able to reset the time and cost counters. The message ‘Timer Reset
Disabled’ will be given and you will not be able to reset the counters until
the phone PIN has been entered correctly.
If you are using a Phase 2 SIM, you may be required to enter the Super
PIN. When you have entered this, press
YES . A confirmation message of
‘Request Accepted’ will be displayed on the screen before returning to
stand-by.
If the Super PIN is entered incorrectly, an error message will be given and
a request to re-enter it. If it is entered incorrectly three times, the message
Super PIN Blocked will be given and you will not be able to reset the
counters or access any other SUPER PIN protected functions until the
PIN has been unblocked.
Call Cost Setup
1. Press SOFT LEFT , 2 , to enter the Call Time Menu.
2. Press 4 to display the Cost Setup menu.
3. Press 1 to display the Unit Cost screen.