Ericsson SATELLITE R290 - Manual (Page 24)

R290 User’s Guide
16
Handling Two Calls
Your phone can handle two calls simultaneously. This allows you to hold
one call and make or receive another, then you can switch between the
two calls. To be able to receive a second call, you must activate the Call
Wait function, see “Personalizing Your Phone” on page 30.
Receiving a Second Call While a Call is in Progress
When you receive a second call, you will hear a tone in the earpiece and
the display shows ‘Call Wait’.
Press YES answer the second call. The current call is put on hold.
The display shows ‘ On Hold’.
To reject the second call, press 0 followed by YES .
Switching between Two Calls
Press YES to switch between the two calls.
Ending the Current Call and Return to the Held Call
1. Press NO to end the current call. The display shows ‘Retrieve?’ and
you hear two beeps.
2. Press YES within three seconds to return to the held call. If you do
not press YES within three seconds, the held call is automatically
ended.
Making a Second Call while a Call Is in Progress
Enter the second phone number and press YES . The first call is put on
hold and the display shows a message ‘1 On Hold’.
Receiving a Third Call
If you are engaged in one call and have a second one on hold, you may
receive a third call. You will hear a tone in the ear piece and ‘Call Wait’
is shown in the display.
You can only have one call on hold at a time, so you need to end the first
or second call before you answer the call.
You can do one of the following:
• Press 0 followed by YES to reject the third call.
• End the first call, retrieve the held call, and answer the incoming call.
• End both calls. The phone rings and the question ‘Answer?’ appears
in the display. Press YES to answer the call.