To store your own telephone number, To edit a number from memory store – Ericsson SATELLITE R290 User Manual

Page 31

R290 User’s Guide

To Store Your Own Telephone Number

The phone can store up to 5 of your own numbers. Normally only 1 is
required, which is the number used to make speech calls with the phone.
However, you may also have different numbers for other services such as
data and fax. The five available stores are accessed as sub-stores to
memory store 0.

1. Press and hold

MEM

for at least half a second. Enter details and

Scroll down to ‘Store?’.

2. Enter

and press

YES

. The display will show:

3. Enter a digit from

and press

YES

to store your own number.

4. To clear a memory store, Press and hold

MEM

, scroll down to

‘Store?’, enter the store number followed by

YES

To Read and Recall a Telephone
Number from the Phone Book Store

To recall a number store in any of your memory stores, press

MEM

for

less than half a second. The following screen will be displayed:

To recall by the name associated with the desired number, enter the name,
or part of it, in the ‘Name?’ line and press either

MEM

YES

. To recall

by the store number, move to the ‘Store?’ line and enter the one or two
digit number followed by

MEM

YES

. Alternatively, precede the

number with one or two zeros to make a 3 digit number and the contents
will be recalled automatically. An example of the display is:

If there are up and down arrows on the screen, you can scroll through the
telephone stores, by using the

SOFT LEFT/RIGHT

keys, or hold down

the soft keys for at least half a second for automatic scrolling. If you have
used a name to recall the stores, they will be scrolled through
alphabetically. If a store number has been used, scrolling will be carried
out numerically.

If the telephone number is more than 12 digits long, only 11 digits will be
shown on the screen. Use the

and

keys to view the rest of the

number.

To dial the selected number, press

YES

To Edit a Number from Memory Store

This feature allows you to quickly select an existing telephone number,
change it into one that is similar and then dial it.

Recall the memory store by the name or store number. Only the telephone
number may be edited and any changes that are made will not be
automatically saved in the memory store.