Call barring – Ericsson SATELLITE R290 User Manual
Page 58
R290 User’s Guide
50
Call Barring
The call barring service lets you control which kind of calls can be made
to or from your phone. This feature is convenient if you lend your phone
to somebody else. This feature is service dependent.
To Check the Call Bar Status
1. Press
SOFT LEFT
,
5
to enter Advanced menu.
2. Press
3
for Call Bar menu.
3. Press
1
for Status.
4. Press
1
to review the Outgoing Call Bar Status. The network will
respond with one of the following messages:
No Outgoing Call Restrictions
All Services Barred Emergency Calls Only
Voice Calls Barred Emergency Calls Only
Messages Barred
Data Calls Barred
Fax Calls Barred
Internat’l Services Barred
Internat’l Voice Calls Barred
Internat’l Messages Barred
Internat’l Data Calls Barred
Internat’l Fax Calls Barred
Internat’l Services Barred Except (Home Country)
Internat’l Voice Calls Barred Except (Home Country)
Internat’l Messages Barred Except (Home Country)
Internat’l Data Calls Barred Except (Home Country)
Internat’l Fax Calls Barred Except (Home Country)
If more than one restriction is set, you can scroll through the messages
one by one using the
SOFT
keys. Alternatively, the network may respond
with a notification message for an unsupported service.
5. If you had pressed
2
the following messages would display:
No Incoming Call Restrictions
All Incoming Services Barred
All Incoming Services Barred When Roaming
2 YES
This accepts the waiting call and puts the active call on
hold.
2X YES
This puts all active calls on hold except call X with
which communication shall be supported (used in
conference calls).
3 YES
Adds a held call to the conversation (i.e. merges the
active and held calls to form or add to a conference call).
4 YES
This merges the active and held calls to perform a call
transfer.
5 YES
Activate a CCBS request for the last dialled number.
This must be done before 15s have elapsed after the end
of the call.
NO
This ends all active and held calls, but not those that are
waiting.
Tel No. YES
This places the active call on hold and sets up a new call
to the telephone number dialled.