Canon EOS R50 Mirrorless Camera (White) - Manual (Page 388)

HDMI display
You can specify how movies are displayed as they are recorded via HDMI to an external
device. Movie output itself corresponds to the [
Movie rec. size ] setting.
The default setting is [ ].
• +
Enables movie display both on the camera screen and on the other device, via
HDMI output.
Camera operations such as image playback or menu display are shown on the other
device via HDMI, not on the camera screen.
•
Deactivates the camera screen during output via HDMI, so that the screen is blank.
Shooting information, AF points, and other information is shown on the external
device via HDMI, but you can stop output of this information by pressing the
<
> button.
Before recording movies externally, confirm that no information is being sent by the
camera by making sure no shooting information, AF points, and so on is displayed
on external monitors or other devices.
Caution
Card recording is not performed with [ HDMI display ] set to [ + ]. Camera
menus and image playback are only displayed on the screen connected via HDMI.
The HDMI output resolution and frame rate are automatically adjusted to suit the
movie recording size.
For longer HDMI output
To continue HDMI output for longer than 30 min., select [ + ], then set [ Auto power
off ] in [ : Power saving ] to [ Disable ] ( ). HDMI output will continue after the camera
screen turns off when the time set in [ Screen off ] elapses.
388