CHAUVET DJ Obey 70 Universal DMX-512 Controller - Manual (Page 17)

Obey 70 User Manual Rev. 7 Page 17 of 69
7. Technical Information
Maintenance To maintain optimum performance and minimize wear, fixtures should be cleaned
frequently. Usage and environment are contributing factors in determining frequency.
As a general rule, fixtures should be cleaned at least twice a month. Dust build-up
reduces light output performance and can cause overheating. This can lead to
reduced lamp life and increased mechanical wear. Be sure to power off fixture before
conducting maintenance.
1. Unplug fixture from power.
2. Use a vacuum or air compressor and a soft brush to remove dust collected on
external vents.
3. After the fixture is at room temperature, clean all lenses with a mild solution of
glass cleaner or Isopropyl Alcohol and a soft lint free cotton cloth or lens tissue.
4. Apply solution to the cloth or tissue and drag dirt and grime to the outside of the
lens.
5. Gently polish optical surfaces until they are free of haze and lint.
Always dry the parts carefully after cleaning them.
Never spin a fan using compressed air.
Technical
Specifications
Dimensions and
Weight
Length Width Height Weight
19 in (483 mm) 7 in (178 mm) 2.8 in (71 mm) 7.3 lb (3.3 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power Power Supply Type Range Voltage Selection
External power supply 100–240 V, 50/60 Hz Auto-ranging
Parameter 120 V, 60 Hz 230 V, 50 Hz
Consumption <1 W <1 W
Operating/Inrush
current
0.2 A 0.2 A
DMX Refresh Rate
25 Hz
Thermal Maximum External Temp.
104 °F (40 °C)
DMX I/O Connectors Connector Type Channel Range
3-pin XLR Sockets 384
Ordering Product Name Item Code Item Number
Obey 70 09080234 OBEY70