CHAUVET DJ Obey 70 Universal DMX-512 Controller - Manual (Page 14)

Page 14 of 69 Obey 70 User Manual Rev. 7
Create a Chase A chase is a series of scenes. Program the scenes before programming the chases.
1. Enter program mode.
2. Select the chase that will be programmed (1–6).
3. Call up the first scene for the chase by pressing the appropriate button. You
may use to navigate through the different pages of the scenes.
4. Once the controller is outputting the correct scene to the lights, press .
5. All LEDs will flash when the scene is added to the chase.
6. Call up the second scene for the chase by pressing the appropriate button.
7. Once the controller is outputting the correct scene to the lights, press .
8. All LEDs will flash when the scene is added to the chase.
9. Continue through steps 6–8 until all of the scenes have been added to the chase.
10. Exit program mode.
Chase Modifications
Adding a Step to a
Chase
This function will add a step after any step within a chase.
1. Enter program mode.
2. Activate the chase.
3. Using , scroll through the banks until you arrive at the bank that
contains the new scene.
4. Press . The display will change to step display mode.
5. Using , scroll to the step that will appear before the new step.
6. Press . The current step on the display will increase by one.
7. Press the new scene : .
8. Press . All LEDs on the controller will flash.
Delete a Scene/Step in a
Chase
1. Enter program mode.
2. Activate the chase.
3. Press . The display will change to step display mode.
4. Using , scroll to the step that you want to delete.
5. Press .
6. All LEDs on the controller will flash.
Copy a Bank into a
Chase
This function copies an entire bank after any existing steps in a chase.
1. Enter program mode.
2. Activate the desired chase.
3. Using , scroll through the banks until you arrive at the bank that you
want to copy into the chase.
4. Press and simultaneously.
5. All LEDs on the controller will flash.
5. Programming Modifications
Delete One Scene Use this function to delete one of the scenes in the controller. Repeat this process for
each scene that you need to delete.
1. Enter program mode.
2. Use to navigate program banks.
3. Press and hold the button while pressing the SCENE you want to delete.
Delete All Scenes Use this function to delete all of the scenes in the controller.
1. Turn off the unit.
2. Press and hold and .
3. Turn on power to the unit (while still holding and ).
4. When all LEDs blink, the function is successfully completed.
Delete a Chase 1. Enter program mode.
2. Activate the chase to be deleted: .
3. Press and simultaneously.
4. When all LEDs blink, the function is successfully completed.
Delete All Chases 1. Enter program mode.
2. Press and simultaneously.
3. While still holding the buttons down, turn the controller OFF.
Delete a Bank of
Scenes
1. Enter program mode.
2. Activate the BANK that you want to delete.
3. Press and the simultaneously.
4. When all LEDs blink, the function is successfully completed.