Enterasys Networks 2H252-25R - Manual (Page 30)

Installing the Device
3-4 Installation
Figure 3-1 Tabletop or Shelf Installation
3.3.2 Rackmount Installation
To install the 2H252-25R in a 19-inch rack, Enterasys Networks includes a strain-relief bracket for
cable management and an accessory kit containing the rackmount brackets, and mounting screws
to attach the rackmount brackets and strain-relief bracket.
Guidelines for the Rackmount Installation
The installation site must be within reach of the network cabling and meet the requirements listed
below:
• An appropriate grounded power receptacle must be located within seven feet of the location.
• Maintain a temperature of between 5
°C (41°F) and 40°C (104°F) at the installation site with
fluctuations of less than 10
°C (18°F) per hour.
4005_00_02
A = 15 cm (6 in)
B = 57 cm (22.5 in)
C = 53 cm (21 in)
C
B
A
D
D = 213 cm (7 ft)
1
2
3
4
5
6
7
8
9
10
15
16
21
22
23
24
11
12
19
20
17
18
13
14
2H252-25R COM
PWR
CPU
RESET
2X 4X 6X 8X 10X 12X 14X 16X 18X 20X 22X 24X
LED MODE
RX-TX
DPX-SPD
FAST ETHERNET WORKGROUP SWITCH