beautypg.com

Introduction, Section names – KORG Electribe Sampler Music Production Station with V2.0 Software (Red) User Manual

Page 4

background image

4

Introduction

Thank you for purchasing the Korg electribe/electribe sampler
Music Production Station.
In order to take full advantage of your new instrument, please
read this instruction manual carefully and use the product as
directed. You should also keep the instruction manual for future
reference.

The electribe/electribe sampler is a production station for dance
music that is capable of creating original music. Using the knobs
and the touch pad on the main unit enables you to edit sounds to
easily create rhythm and phrase patterns with a single unit.
Basic operation for the electribe sampler is the same as for the
electribe.
For additional explanations that apply to the electribe sampler,
refer to “electribe sampler features” (

p. 16) and “Recording &

Editing Samples” (

p. 16).

TIP

Illustrations in this manual show the electribe.

1. Section names

Top panel

1

4

5

6

2

3

7

10

8

9

11
12

13

6. Touch pad section
Touch pad

This pad is used for playing with the functionality of the gate
arpeggiator or touch scale, or for controlling the master effect.

Gate Arp button

This button turns the gate arpeggiator function ON.

Touch Scale button

This button turns the touch scale function ON.

Master Fx button

This button turns the master effect control function ON or
OFF.

MFX Hold button

This button allows you to maintain the previously set master
effect status by using the touch pad even after letting your
fingers off the touch pad, when turning the Master FX button
ON.

TIP

The ON / OFF status of the MFX Hold button can be

memorized in a pattern.

7. Common section
Value knob

This knob changes the value of the parameter that’s currently
shown on the display.

1. Power button

This button turns power ON or OFF.

2. Volume knob

This knob adjusts the volume output from the Line Out jack or
the Headphone jack.

3. Input Level knob

This knob adjusts the input level from the Audio In jack.

4. Display

This shows information for patterns, parts and parameter
settings.

5. Transport section

(Rec) button

This button enables recording of rhythms, phrases or knob
movements. Pressing this button during recording will stop
the recording process and playback will continue.

(Stop) button

This button will stop playback.

(Play/Pause) button

This button starts playing a pattern or pauses it.

Tap button

Pressing this button a couple of times at the desired BPM will
change the tempo to your desired selection.