KORG Electribe Sampler Music Production Station with V2.0 Software (Red) - Manual (Page 19)

19
2. Error message
Pressing the Exit button will close the message window.
Card Error
Memory card is damaged.
→ Make a backup of all files in the memory card.
→ Make a backup of all data in your memory card to a computer,
etc. and then format the memory card with this system. Upon
completion, you can replace all of your data to the newly
formatted memory card.
Protected
Data protection is turned ON when you save data to a memory
card.
→ If the write protect switch on the memory card is locked,
unlock it.
Card Full
The memory card does not have sufficient available space.
→ Delete file(s) on the memory card to secure clear sufficient
space and then write or save your data again.
Event Over
The number of events exceeds the maximum number of events
that can be recorded.
File Error
File can’t be read/write correctly.
Memory Full
This system does not have sufficient memory capacity when you
load data from a memory card or copy data to this system.
→ Erase unnecessary data to increase the amount of available
space.
Motion Seq Full
Motion sequence cannot be recorded.
→ The electribe/electribe sampler can support up to 24 motion
sequence patterns. Erase any unnecessary motions and try to
add your motion sequence again.
Specifications
The maximum number of sounds (entire pattern):
MAX. 24 voices (The number of simulta-
neous sounds in entire pattern depends on
the type of Oscillator, Filter or Insert Fx.)
The maximum number of sound (per part):
MAX, 4 voices
Connectors: Audio Out L jack (mono 1/4” phone jack),
Audio Out R jack (mono 1/4” phone jack),
Audio In jack (Stereo 1/8” mini phone
jack), Headphone jack (Stereo 1/8” mini
phone jack), Sync In jack, Sync Out jack,
MIDI OUT jack, MIDI IN jack, USB
connector (micro USB B type)
Power supply: AC adapter (DC 9V ),
Six AA batteries (alkaline or nickel-metal
hydride batteries)
Battery life: approximately five hours (Power Saving:
ON, with nickel-metal hydride batteries)
Current consumption: 500 mA or less
Dimensions
(W x D x H)
: 13.35” x 7.44” x 1.77” / 339 x 189 x 45 mm
Weight: 3.53 lbs. / 1.6 kg
Operating temperature: 0–+40 ˚C (non-condensing)
Included items: Owner’s manual, AC adapter, MIDI
conversion cable x 2
* Specifications and appearance are subject to change without notice for improve-
ment.