Output voltage selection, Caution – Emerson GXT2U User Manual
Page 20
16
Output Voltage Selection
The Output Voltage is user configurable and is designed to allow selecting or
changing the desired output voltage to match the utility via the Liebert
GXT2U Configuration Program provided with the UPS. The settings to choose
from are 200, 208, 220, 230, and 240 VAC output. The factory default setting
is 208 VAC.
!
CAUTION
Never change the voltage settings while the UPS is ON and
powering connected loads.
NOTE
Setting output voltage to 200 VAC will cause the UPS unit to be
derated to 2400 VA, 1680 watts.
See also other documents in the category Emerson Tools:
- 1000VA (2 pages)
- SAG581126000 (123 pages)
- Liebert NX 10-30kVA (112 pages)
- Liebert NX 400V (132 pages)
- Nfinity 240V (44 pages)
- 10 kVA (16 pages)
- 12-20kVA (8 pages)
- NT5C06D (56 pages)
- Liebert Remote Monitoring Panel (28 pages)
- AccuVar UL94-5V (2 pages)
- PSA1000MT3-120U (2 pages)
- Liebert Power Solutions (44 pages)
- Series 610 (52 pages)
- Liebert GXT2-10KIPPCBL (2 pages)
- GXT2-PP20KRT208 (36 pages)
- Liebert FS 510 VDC (2 pages)
- Libert AC Power System (4 pages)
- 250-400kVA (72 pages)
- Albr BDS-40 (2 pages)
- NXL 400 kVA (2 pages)
- PSI-XR (4 pages)
- Liebert GXT2-10000RT208 (56 pages)
- LXP48F1 (43 pages)
- LIEBERT GXT5000R-208 (32 pages)
- 650VA (2 pages)
- Liebert NX 208V (80 pages)
- 480VAC (2 pages)
- Liebert NX 480V (108 pages)
- Liebert UPStation GXT2U (40 pages)
- 7400 (67 pages)
- Series 600 (168 pages)
- Remote Power Monitor Panel (2 pages)
- Albr BDS-256XL (2 pages)
- Packaged Drives and Engineered Systems (24 pages)
- NXL UPS Systems (48 pages)
- LIEBERT NPOWER 30-130KVA (2 pages)