Epson 24-Pin - Manual (Page 50)

2-6 Printing on Continuous Paper
R4C4620
Rev. C
A5 size CONT.FM
6/14/00 Pass 3
L Proof Sign-off:
SEI
Y.Ohkawara T.Takahashi
T.Takahashi
SEI M.Kauppi K.Blair
Using the Push Tractor
To use the push tractor, load continuous paper in the rear slot. For
information on when to use the push tractor, see “Available Paper
Paths” on page 4.
Note:
The tractor is installed in the push position when the printer is shipped.
If a tractor is not installed in the push position, go to “Reinstalling the
tractor in the push position” on page 2-13.
Loading paper onto the push tractor
If a tractor is installed in the pull position, you need to remove it
and install the paper tension unit as described on “Removing the
pull tractor” on page 2-24 before using the push tractor.
Note:
To avoid paper jams, it is best to load thick multipart forms using the
front or bottom slot and the pull tractor.
c
Caution:
Do not load continuous paper with labels in the rear paper slot;
the labels may come off their backing sheet inside the printer and
cause a paper jam.