Escient MP-100 - Manual (Page 89)

P AGE 89
F IRE B ALL -MP I NSTALLATION & U SER ’ S G UIDE - M22002-01A1
C HAPTER 7 - C USTOMIZING F IRE B ALL -MP
To Change Com Port Settings
u Press the SETUP key on the remote control or keyboard. The SETUP main
menu displays.
v Select the menu item com ports . The menu displays.
w Select the sub-menu item you want to modify and follow the instructions on the
screen.
com port settings - During the Quick Start setup, touchscreens attached to
the communication ports were automatically detected. If you attach additional
equipment use this screen to indicate which of the 2 com ports are used by an
optional touch panel, external control system, or Elan system.
calibrate touch panel - Allows an attached ETP-1000 touch screen display
device to be calibrated.
x Exit SETUP by selecting the EXIT menu item located at the bottom of the main
menu, or by pressing the SETUP key when on the main menu or any sub-menu. 2
The LEFT, and RIGHT ARROW
keys on the remote or keyboard
are used to position the screen
horizontaly.