Escient MP-100 - Manual (Page 27)

P AGE 27
F IRE B ALL -MP I NSTALLATION & U SER ’ S G UIDE - M22002-01A1
C HAPTER 2 - S ETTING U P F IRE B ALL -MP
Connecting FireBall-MP to a VGA Projector, Monitor or Touch
Screen.
u
Use a VGA cable.
(Not supplied with FireBall-MP.)
v
Connect one end of the cable to the FireBall-MP VGA port.
w
Connect the other end of the cable to the VGA port on your VGA device.
2
If you are connecting to a VGA
Projector or Monitor, you will need
to supply your own VGA cable
(must be less than 25 feet).
The Escient ETP-1000 includes the
proper VGA cable.