Escient MP-100 - Manual (Page 32)

P AGE 32
F IRE B ALL -MP I NSTALLATION & U SER ’ S G UIDE - M22002-01A1
C HAPTER 2 - S ETTING U P F IRE B ALL -MP
Connecting the Power Cord
u Use the Power Cord.
v Connect one end of power cord to the FireBall-MP AC Port (plug).
w
Connect the other end of the power cord to a 120V electrical outlet.
Caution: To prevent electric
shock, do not use a 3 wire to 2
wire adapter plug. A 3 prong
outlet is required.
2
It is recommended to connect
the power cord to a UPS, surge
supressor, or directly to a wall
outlet. NEVER CONNECT THE
POWER CORD TO A SWITCHED
OUTLET.