Enterasys Networks Enterasys SecureStack B2 B2G124-24 - Manual (Page 34)

Installing Optional Mini-GBICs
3-4 Hardware Installation
Installation
To install a Mini‐GBIC that has an MT‐RJ connector, refer to Figure 3‐1 , or for a Mini‐GBIC
with an LC connector, refer to Figure 3‐2 , and proceed as follows:
1. Hold the Mini‐GBIC with the top side positioned as shown, and the 7‐pin edge
connector facing the port slot.
2. Align the Mini‐GBIC with the port slot.
3. Push the Mini‐GBIC into the port slot until the Mini‐GBIC “clicks” and locks into
place.
Figure 3-1 Mini-GBIC with MT-RJ Connector
1 Mini-GBIC (MGBIC-MT01) 4 Port slot
2 Mini-GBIC , top side 5 Protective dust cover
3 7-pin edge connector (insertion side) 6 Release tab
21
22
23
24
21
22
23
24
B2G124-24
Д
Б
А
В
Г
Е