Extron Electronics VersaTools MTP Series - Manual (Page 19)

VersaTools ® MTP Series • Reference Information VersaTools ® MTP Series • Reference Information
Specifications, Part Numbers, and Accessories
A-3
Return loss .................................... <-35 dB @ 5 MHz
DC offset ....................................... ±20 mV with input at 0 offset
Sync
Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Audio — audio models (A, AV, SVA models) only
Gain
RCA models ..................... Unbalanced output: 0 dB (unity)
All other models .............. Unbalanced output: 0 dB (unity); balanced
output: +6 dB
Frequency response ..................... 20 Hz to 20 kHz, ±0.48 dB
THD + Noise ................................ 0.08% @ 1 kHz, 0.3% @ 20 kHz at nominal
level
S/N
RCA models ..................... >90 dB, at maximum output (unweighted)
All other models w/audio >80 dB, balanced at maximum output
(unweighted)
Crosstalk ....................................... <-80 dB @ 1 kHz, fully loaded
Stereo channel separation .......... >75 dB @ 1 kHz
CMRR ............................................ >34 dB @ 20 Hz to 20 kHz
Audio input — audio models (A, AV, SVA models) only
Number/signal type
MTP T AV, MTP T SV A . 1 stereo, balanced/unbalanced
MTP T AV/SV A RCA, MTP T AAP
1 stereo, unbalanced
MTP R Series .................... 1 set of proprietary analog signals
Connectors
MTP T AV, MTP T SV A . (1) 3.5 mm captive screw connector, 5 pole
MTP T AV/SV A RCA, MTP T AAP
1 pair of RCA female
MTP R Series .................... 1 female RJ-45 (shielded)
Impedance .................................... >5.6k ohms ±5% unbalanced, >10k ohms
±5% balanced
Nominal level ............................... -10 dBV (0.32 Vrms)
Maximum level ............................ >+2.4 dBu (balanced or unbalanced) at
1%THD+N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu.
A-2
Specifications
Video
Gain ............................................... Unity
Differential phase error .............. <1.0º at 3.58 MHz and 4.43 MHz
Differential gain error ................. <1.0% at 3.58 MHz and 4.43 MHz
Video input
Number/signal type
MTP T CV/AV Series ..... 1 composite video
MTP T SV Series .............. 1 S-video
MTP R CV/AV/SV Series 1 set of proprietary analog signals
Connectors
MTP T CV/AV Series ..... 1 female BNC
MTP T AV AAP ............... 1 female RCA
MTP T SV Series .............. 1 female 4-pin mini DIN
MTP R CV/AV/SV Series 1 female RJ-45
Nominal level ............................... 1 Vp-p for Y of S-video and for composite
video
0.3 Vp-p for C of S-video
Minimum/maximum levels ...... 0.3 V to 1.5 Vp-p with no offset
Impedance .................................... 75 ohms
Return loss .................................... <-30 dB @ 10 MHz
DC offset (max. allowable) ......... 100 mV
Video output
Number/signal type
MTP T CV/AV/SV Series and MTP T AAP Series
1 set of proprietary analog signals
MTP R CV/AV Series ..... 1 composite video
MTP R SV Series .............. 1 S-video
Connectors
MTP T CV/AV/SV Series 1 female RJ-45
MTP T AAP Series ........... 1 female RJ-45 on a 3” (7.6 cm) pigtail
MTP R CV/AV Series ..... 1 female BNC
MTP R SV Series .............. (1) 4-pin mini DIN
Nominal level ............................... 1 V p-p for Y of S-video and for composite
video
0.3 V p-p for C of S-video
Minimum/maximum levels ...... 0.3 V to 1.5 Vp-p
Impedance .................................... 75 ohms