Philips T-Line 65BDL3552T 65" 4K Digital Signage Touchscreen Display - Manual (Page 50)

65BDL3552T/75BDL3552T/86BDL3552T
38
Language
Select the language used in the OSD menu.
The options are: English/Deutsch/
简 体中文 /Français/
Italiano/Español/ Pyccкий /Polski/Türkçe/ 繁體中文 / 日本語
/Português/ /Danish/Swedish/Finnish/Norwegian/
Dutch.
Power Save
Mode 1 [TCP off, WOL on, auto off]
Mode 2 [TCP off, WOL on, auto on/off]
Mode 3 [TCP on, WOL off, auto on/off]
Mode 4 [TCP on, WOL off, no auto on/off]
Power save modes
Mode 1: DC off -> Power off. LED: Red.
Power Save -> Power off, LED: Red
Mode 2: DC off -> Power off, LED: Red.
Power Save -> Power Saving. LED: Orange. Can be woken
up.
Mode 3: DC off -> Back light off, LED: Red
Power Save -> Back light off, LED: Orange. Can be woken
up.
Mode 4: DC off -> Back light off, LED: Red
Power Save -> Will not enter power save mode. show “no
signal” only.
RCU Power
Button Off No Signal Android
Mode 1 DC OFF DC OFF board power
off
Mode
2 DC OFF when signal is back,
system wake up board power
off
Mode
3 Backlight
OFF Backlight OFF keep power
on
Mode
4 Backlight
OFF Backlight ON, show no
signal keep power
on
Following table is the action for Android board with
different power mode.
DC off/on: press power button by RC
Power mode in
OSD Mode 1/2 Mode 3/4
DC off shutdown 1. The current source APK(such
as MediaPlayer, Broswer or
SmartCMS) will be closed.
2. Android system will go to
the default black launcher.
DC on Boot up 1. Android system reboots
OPS settings
Set the OPS configuration under each power condition.
• {Auto} - After selecting {Card OPS} for video source
input, the OPS will be set to off when the display power
is set to off, or vice versa. If you set to other video source
inputs, the OPS will always be set to on.
• {Always off} - The OPS will always be set to off.
• {Always on} - The OPS will always be set to on.
Advanced option reset
Reset all settings in the Advanced option menu to factory
preset values.
1. Press
[SET] or [ ] button to enter the submenu.
2. Press [ ] or [ ] button to select {Reset} and press the
[SET] button to restore settings to factory preset values.
3. Press the [EXIT] button or select {Cancel} and press the
[SET] button to cancel and then return to the previous
menu.
6.2.6. Android Settings
Please enter the password
CANCEL CLEAR OK
Pincode
Default password is 1234.
For more information
please refer to the instructions of 5.
Setting.