NEC E558 55" Class 4K UHD Commercial LED TV - Manual (Page 9)

English - 6
CAUTION
1
Handling the power cord.
Handle the power cord with care. Damaging the cord could lead to fire or electric shock.
• When connecting the power cord to the product’s AC IN terminal, make sure the
connector is fully and firmly inserted.
• Fasten the power cord to the product by attaching the clamp to prevent loose
connection.
• Do not connect or disconnect the power cord with wet hands.
• When connecting or disconnecting the power cord, pull the power cord out by holding
onto its plug.
• When cleaning the product, for safety purposes, unplug the power cord from the
power outlet beforehand. Regularly dust off the power cord by using a soft dry cloth.
• Before moving the product, make sure the product power is off, then unplug the
power cord from the power outlet and check that all cables connecting the product to
other devices are disconnected.
• When you are not planning to use the product for an extended period of time, always
unplug the power cord from the power outlet.
2
Do not bind the power cord and the USB cable. It may trap heat and cause a fire.
3
Do not connect to a LAN with excessive voltage.
When using a LAN cable, do not connect to a peripheral device with wiring that might
have excessive voltage. Excessive voltage on the LAN port may cause an electric
shock.
4
Do not climb on the table where the product is installed. Do not install the product on
a wheeled table if the wheels on the table have not been properly locked. The product
may fall, causing damage to the product or personal injury.
5
Installation, removal, and height adjustment of the optional table top stand.
• When installing the table top stand, handle the unit with care to avoid pinching your
fingers.
• Installing the product at the wrong height can cause tipping.
Please install your product at proper height to prevent personal injury or damage to
the product.
6
Do not push or climb on the product. Do not grab or hang onto the product.
The product may fall, causing damage to the product or personal injury.
7
Do not impact the LCD panel surface, it can cause serious damage to the product or
personal injury.