Network settings, Roomvie settings – NEC E558 55" Class 4K UHD Commercial LED TV User Manual
Page 58
English - 55
Network Settings
Click on “NETWORK” on the left-hand column on the HOME screen to enter the setting screen.
Top
INPUT SOURCE: HDMI1
STATUS
PROTOCOL
NETWORK SETTINGS
DHCP
INTERFACE
IP ADDRESS
192.168.0.10
Off
SUBNET MASK
255.255.255.0
DEFAULT GATEWAY
0.0.0.0
DNS PRIMARY
0.0.0.0
DNS SECONDARY
0.0.0.0
NETWORK
SYSTEM
LOGOUT
TCP
ROOMVIEW
CRESTRON CONTROL
AMX
NAME
DHCP
Select a method for setting the IP ADDRESS.
Off:
Sets fixed network settings.
On:
Obtains the network settings from the DHCP server on the network.
Manual DNS: Obtains the network settings from the DHCP server on the network but the DNS
is set manually.
NOTEN:
Consult your network administrator if you have any trouble with the connection.
IP ADDRESS
Set the IP address for the monitor connected to the network when [Off] is selected for [DHCP].
SUBNET MASK
Set the subnet mask for the network to which the monitor is connected when [Off] is selected for
[DHCP].
DEFAULT GATEWAY Set the default gateway for the network to which the monitor is connected when [Off] is selected for
[DHCP].
Enter [0.0.0.0] to delete the setting.
DNS PRIMARY
Enter the IP address of the primary DNS server of the network connected to the monitor.
NOTEN:
Enter [0.0.0.0] to delete the setting.
DNS SECONDARY
Enter the IP address of the secondary DNS server of the network connected to the monitor.
NOTEN:
Enter [0.0.0.0] to delete the setting.
ROOMVIE Settings
Click on “ROOMVIEW” on the left column below HOME.
The monitor supports Crestron’s ROOMVIEW, allowing multiple devices connected in the network to be managed and controlled
from a computer or a controller.
ROOMVIEW
Enables or Disables managing from the computer.
PORT
Sets the Crestron port used for Ethernet communication.