NEC E558 55" Class 4K UHD Commercial LED TV User Manual
Page 82
English - 79
Setup
HDMI Settings
CEC
This function makes it possible to control a device supporting HDMI CEC connected to the
HDMI terminal.
When set to On, HDMI CEC is enabled.
EDID
Sets the HDMI mode.
Mode 0N: Max resolution is 1920 x 1080 (60 Hz).
Mode 1N: Max resolution is 3840 x 2160 (30 Hz).
Mode 2N: Max resolution is 3840 x 2160 (60 Hz), HDCP 2.2, or HDR.
Video Range
Adjust the gradation range to be shown according to the video signal to improve the whiteout
and blackout of the image.
HPD Delay
This function makes it possible to control the time until the video from the HDMI terminal is
displayed.
When set to Off, the time until the video is output can be reduced but the video may not be
output depending on the device. In such a case, set [HPD Delay] to On.
VGA Options
Enabled when a VGA signal is input.
VGA Mode
Select [RGB] or [YPbPr] depending on the signal received into the VGA input terminal.
Auto Adjust
Automatically adjusts settings such as the image position.
H.Position
Adjusts the horizontal position of the screen.
Press the
u
button to move the screen to the right or the
t
button to move it to the left.
V.Position
Adjusts the vertical position of the screen.
Press the
u
button to move the screen to the top or the
t
button to move it to the bottom.
Clock
Adjust this setting when vertical lines appear on the screen or when the size differs at the right
and left of the screen.
Phase
Adjust this setting when noise appears in the horizontal direction, when the characters are
blurred, or when the contours are not sharp.
H.Resolution
The video can be enlarged/reduced in the horizontal direction using this function only when
[Standard] is selected in [Aspect Ratio].
NOTEN:
This function may not operate depending on the input signal.
V.Resolution
The video can be enlarged/reduced in the vertical direction using this function only when
[Standard] is selected in [Aspect Ratio].
NOTEN:
This function may not operate depending on the input signal.
Reset VGA Options
Resets the VGA Options settings to their default values.