Http browser, Overview – NEC E558 55" Class 4K UHD Commercial LED TV User Manual
Page 56
English - 53
HTTP Browser
Overview
Connect the monitor with a commercially-available LAN cable to configure the LAN settings using the HTTP server function.
This monitor uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. Refer to the help files for
the Web browser to change the settings to use JavaScript and Cookies.
To access the HTTP server, launch a web browser on a computer connected to the same network as the monitor and enter the
following URL in the Web address field.
Network Settings
http://
NOTEN:
• The control software can be downloaded from the NEC Display website.
• By default, the IP address of the monitor is set automatically. After a reset, the IP address is obtained
automatically.
• Depending on the network environment, the display speed and response to commands or clicks on buttons may
be slow, or the operations may not be recognized. In such a case, consult your network administrator.
The monitor may not respond if the buttons shown on the browser are repeatedly pressed in rapid intervals. In
such a case, wait a moment and try again. If you still can’t get a response, turn the monitor off and then back on.
• If the monitor Network Settings screen does not appear in the Web browser, press the Ctrl+F5 keys to refresh
your Web browser.
• To control the monitor via a LAN, see “External_Control.pdf” in our Website (see “Appendix B External
Resources”
). If the screen does not appear, clear the cache of the Web browser.
Preparation Before Use
Connect the monitor to the network using a commercially-available LAN cable before attempting to use browser operations.
Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the setting
method. Although the type of the proxy server will be a factor, it is possible that items that have been set will not be shown
depending on the effectiveness of the cache, and the settings configured from the browser may not be reflected in operation. It
is recommended that a proxy server is not used unless the network environment requires it.