Thor 4-Channel HDMI to QAM Modulator and IPTV Streaming Encoder with Low Latency - Manual (Page 5)

HDMI/SDI-QAM-IPLL
Thor Fiber Tel: (800) 521-84 Email: [email protected] https://thorbroadcast.com/ http://www.thormodulators.com/

VBR/CBR rate control mode

PSI/SI editing

PCR adjusting

PID re-mapping and pass through

DVB-C RF out and ASI out; IP out

LCN (Logical Channel Number) support

Modular design 1RU

LCD display, Remote control and firmware

Web-based NMS management; Updates via web

Lowest cost per channel
1.3 Principle Chart
MUX
Modulating ASI In
ASI&IP Output
MPEG-2 HD/SD
MPEG-4 HD/SD
Encoding
HDMI/SDI
Source
RF In
Built-in
Combiner
RF
1.4 Specifications
HDMI Encoding Input
Video Input Option 1: HDMI*1
Option 2: HDMI*2
Encoding MPEG2; MPEG4 AVC/H.264 (for option 1:
HDMI*1)
MPEG4 AVC/H.264 (for option 2:HDMI*2)
Bitrate 1-19.5Mbps
Resolution 1920*1080_60P, 1920*1080_50P,
(-for MPEG4 AVC/H.264 only)
1920*1080_60i, 1920*1080_50i,
1280*720_60p, 1280*720_50P
720*480_60i, 720*576_50i
Low Delay Normal, Mode 1, Mode 2
(for option 1: HDMI*1)
Rate Control VBR/CBR
Chroma 4:2:0
Aspect Ratio 16:9,4:3
Audio
Encoding MPEG1 Layer II; LC-AAC; HE-AAC and Dolby
Digital AC3 2.0 (Optional) (for option 1:
HDMI*1)
MPEG1 Layer II(for option 2: HDMI*2)
Sample rate 48KHz
Bitrate 64/96/128/ 192/256/320kbps