HP OMEN 27s 27" HDR 240 Hz Gaming Monitor - Manual (Page 17)

2. Remove the hinge from the VESA recess located on the rear of the monitor head.
3. To attach the monitor head to a swing arm or other mounting device, align the mounting plate on
the swing arm with the screw holes on the back of the monitor head (1).
IMPORTANT: If these instructions do not apply to your device, then follow the mounting device
manufacturer’s instructions when mounting the monitor to a wall or swing arm.
4. Insert four mounting screws through the holes on the mounting device and into the VESA screw
holes on the back of the monitor head (2) and secure the screws (3).
Connecting the cables
In addition to details about how to connect a cable, this section contains information about how your
monitor functions when you connect certain cables.
NOTE: The monitor supports HDMI, DisplayPort, or USB Type-C inputs (select models). The video
mode is determined by the video cable used. The monitor automatically determines which inputs have
valid video signals. You can select the inputs through the OSD menu. The monitor ships with select
cables. Not all cables shown in this section are included with the monitor.
1. Place the monitor in a convenient, well-ventilated location near the computer.
12 Chapter 1 Getting started