HP OMEN 27s 27" HDR 240 Hz Gaming Monitor - Manual (Page 15)

2. Align the base with the stand (1), secure the latch (2), and tighten the screw (3).
3. Attach the stand to the back of the monitor.
Mounting the monitor head
To attach your monitor to a wall using a swing arm or other mounting fixture, follow the steps in this
section to safely and securely connect your monitor.
IMPORTANT: This monitor supports the VESA industry-standard 100 mm mounting holes. To attach a
third-party mounting solution to the monitor head, use four 4 mm, 0.7 pitch, and 10 mm long screws.
Longer screws might damage the monitor. Be sure that the manufacturer’s mounting solution is
compliant with the VESA standard and is rated to support the weight of the monitor head. For best
performance, use the power and video cables provided with the monitor.
NOTE: This apparatus is intended to be supported by a UL-listed or CSA-listed wall-mount bracket.
Removing the monitor stand
If you decide to use a wall mount instead of the monitor stand that you attached, first remove the stand.
IMPORTANT: Before you disassemble the monitor, be sure that the monitor is turned off, and all
cables are disconnected.
10 Chapter 1 Getting started