HP E27m 27" 16:9 IPS Monitor with USB Type-C Docking - Manual (Page 28)

NOTE: The ICM color profile is written in accordance with the International Color Consortium (ICC) Profile
Format specification.
Using the OSD menu
You can adjust your HP monitor to suit your preferences. Use the OSD menu to customize the viewing features
of your monitor.
To access and make adjustments in the OSD, use the buttons at the bottom of the monitor’s front bezel.
To access the OSD menu and make adjustments:
1. If the monitor is not already on, press the power button to turn on the monitor.
2. Press the Menu button.
3. Use the three function buttons to navigate, select, and adjust the menu choices. The on-screen button
labels vary, depending on which menu or submenu is active.
The following table lists possible menu selections in the OSD main menu. It includes descriptions for each
setting and its impacts on your monitor's appearance or performance.
Table 2-1 OSD menu options and descriptions for using a button or a controller (select products only)
Main menu Description
Brightness+ Adjusts the brightness and contrast level of the screen.
Color Selects and adjusts the screen color.
Image Adjusts the screen image.
Input Selects the video input signal (USB Type-C, HDMI, or DisplayPort) and adjusts audio settings.
Selects from three audio preset modes.
Power Adjusts the power settings.
Menu Adjusts the OSD menu and function button controls, and selects the language in which the OSD menu is
displayed (the factory default is English).
Management Adjusts the DDC/CI settings and returns all OSD menu settings to the factory default settings.
Information Provides information about the monitor, such as optimal display mode, power mode, and serial number.
Exit Exits the OSD menu screen.
Using the OSD function buttons
The function buttons offer useful actions, and you can customize all but one of them to make them even more
useful.
NOTE: The actions of the function buttons vary among monitor models.
For information about changing the function of the buttons, see Reassigning the function buttons on page
23 .
22 Chapter 2 Using the monitor