HP E27m 27" 16:9 IPS Monitor with USB Type-C Docking - Manual (Page 19)

5. Slide the stand out of the recess (3).
Attaching the monitor head to a mounting device
You might need additional tools such as a screwdriver (purchased separately) when you attach a mounting
device. To avoid damage to your monitor, follow these instructions.
1. Remove the four screws from the VESA holes located on the rear of the monitor head.
2. To attach the monitor head to a swing arm or other mounting device, insert four mounting screws
through the holes on the mounting device and into the VESA screw holes on the back of the monitor
head.
IMPORTANT: If these instructions do not apply to your device, then follow the mounting device
manufacturer’s instructions when mounting the monitor to a wall or swing arm.
Routing the cables
The monitor stand includes a cable management feature that you can use to organize your monitor cables.
1. Route any cables that you want to organize through the stand.
Attaching the monitor head to a mounting device 13