HP E27m 27" 16:9 IPS Monitor with USB Type-C Docking - Manual (Page 20)

2. Connect the cables to the appropriate connectors on the rear of the monitor.
Connecting the cables
In addition to details about how to connect a cable, this section contains information about how your monitor
functions when you connect certain cables.
NOTE: Depending on the model, the monitor might be capable of supporting HDMI, DisplayPort, or USB
Type-C inputs. The video mode is determined by the video cable used. The monitor automatically determines
which inputs have valid video signals. You can select the inputs through the OSD menu. The monitor ships
with select cables. Not all cables shown in this section are included with the monitor.
1. Place the monitor in a convenient, well-ventilated location near the computer.
2. Connect a video cable.
NOTE: The monitor automatically determines which inputs have valid video signals. USB Type-C will be
automatically selected. To select any input, including USB Type-C, open the OSD menu and select Input.
● Connect one end of a DisplayPort cable to the DisplayPort connector on the rear of the monitor and
the other end to the DisplayPort connector on the source device.
14 Chapter 1 Getting started