Eizo FlexScan S1934 19" 5:4 Square IPS Monitor - Manual (Page 31)

Reference | 6
31
1. Lay the LCD monitor on a soft cloth spread over a stable and flat surface with the
LCD panel surface facing down.
2. Remove the stand.
Prepare a screwdriver.
Use the screwdriver to remove the screws that secure the unit to the stand.
3. Attach the arm or stand to the monitor.
For installation, use commercially available screws that meet the following conditions:
– Nominal diameter: M4
– Length: Between 9.4 mm and 12.0 mm (if using washers, add the washer thickness)