Eizo FlexScan S1934 19" 5:4 Square IPS Monitor - Manual (Page 21)

Advanced Adjustments/Settings | 3
21
3.2.3 Preferences
The monitor’s settings can be configured to suit the usage environment or personal
preference.
Menu Rotation
Settings: "0°" / "90°"
When the monitor is used in a portrait position, the direction of the Setting menu can also be
changed.
Note
• Check whether the cables are connected properly.
• It is necessary to configure the settings of the PC to use the monitor in a portrait position. For
details, refer to our web site ( www.eizoglobal.com ).
Power Save
Settings: "On" / "Off"
The monitor can be set to enter power saving mode according to the state of the PC.
The monitor changes to power saving mode about 15 seconds after signal input ceases to
be detected.
When the monitor has shifted to power saving mode, images are not displayed on the
screen and audio is not output.
• How to exit power saving mode
– Press an operation switch (excluding ) on the front of the monitor
– The monitor automatically exits power saving mode when the monitor receives input
Note
• At the time of shifting to power saving mode, a message that indicates the transition is displayed
five seconds in advance.
• When not using the monitor, you can disconnect the power plug so that the power is cut
completely.
Power Indicator
Settings: "On" / "Off"
The power indicator (white) can be turned off in normal operation mode.
Monitor Reset
Restores all settings to their default settings except for the following settings:
• Settings on the "Administrator Settings" menu