Eizo FlexScan S1934 19" 5:4 Square IPS Monitor - Manual (Page 28)

5 | Troubleshooting
28
5.3 Imaging Problems (Analog only)
Screen is misaligned
• Use "Hor. Position" or "Ver. Position" in the Setting menu to adjust the positioning of the
screen (see Analog Adjustment - Hor. Position / Ver. Position [ } 20] ).
• If the graphics board's utility has a function to change the position of the image, use that
function to adjust the position.
Vertical lines appear on the screen / Part of the screen is flickering
• Try adjusting "Clock" in the Setting menu (see Analog Adjustment - Clock [ } 20] ).
The whole screen appears to flicker or bleed
• Try adjusting "Phase" in the Setting menu (see Analog Adjustment - Phase [ } 20] ).
5.4 Other Problems
The Setting menu does not appear.
• Check whether the operation switch lock function is active (see Key Lock [ } 24] ).
Cannot select items in the Setting menu.
• Items that are displayed with gray text cannot be changed.
• "Color" items cannot be changed in some color modes. Setting the color mode to "User
1" or "User 2" will allow you to change all items (see Color [ } 16] ).
No audio output
• Check whether the stereo mini jack cable is connected properly.
• Check whether the volume is set to "0".
• Check the PC and audio playback software to see whether they are configured
correctly.
• Check the "Sound Source" setting when using the DisplayPort input (see Sound Source
[ } 19] ).