Eizo FlexScan S1934 19" 5:4 Square IPS Monitor User Manual

Page 20

3 | Advanced Adjustments/Settings

Analog Adjustment - Auto Range Adjust

The signal output level can be automatically adjusted to enable display of all color
gradations (0 to 255). When you select "Auto Range Adjust", a message will appear. Select
"Yes".

Analog Adjustment - Clock

Flickering of vertical lines or part of the screen can be minimized.

Note

• It is easy to overlook the point where the setting is suitable, so please finely adjust.

Analog Adjustment - Phase

Flickering or bleeding of the screen as a whole can be minimized.

Note

• Flickering or bleeding may not fully disappear, depending on the PC and graphics board you are

using.

• If vertical stripes appear on the screen after completing the setting, adjust "Clock" again.

Analog Adjustment - Hor. Position / Ver. Position

The display position (horizontal, vertical) of the screen can be adjusted.

Note

• The number of pixels and the pixel positions of the LCD monitor are fixed, so there is one correct

display position for images. Position adjustment is for adjusting an image to the correct position.