Eizo FlexScan S1934 19" 5:4 Square IPS Monitor User Manual
Page 19
Advanced Adjustments/Settings | 3
19
• For DisplayPort / DVI input
Functions that can be adjusted differ depending on the input signal.
✓
: Adjustable, -: Not adjustable
Function
Input Signal
DisplayPort
DVI
D-SUB
Sharpness
✓
✓
✓
Sound Source
✓
-
-
Analog Adjustment
-
-
✓
Sharpness
Settings: "-2" – "2"
When a low-resolution image is displayed, the text and lines of the image may appear
blurry. This blurriness can be reduced by configuring the settings for sharpness.
Note
• For some display resolutions, it is not necessary to configure the settings for sharpness.
("Sharpness" is not a value that can be selected.)
Sound Source
Settings: "Stereo Mini Jack" / "DisplayPort"
The sound source can be switched where there is a DisplayPort signal input.
Note
• The setting is fixed to "Stereo Mini Jack" when there is a DVI signal input and D-Sub signal input.
Analog Adjustment - Auto Screen Adjust
Screen flickering, display position, and size can be adjusted automatically. Selecting "Auto
Screen Adjust" displays a message. Select "Yes" to enable this function.
Note
• The automatic screen adjustment function works correctly when an image is fully displayed over
the entire displayable area of the screen. It does not work properly in the following cases:
– When an image is only displayed on part of the screen (computer startup screen, etc.)
– When a black background (wallpaper, etc.) is used
Also, this function may not work properly with some graphic boards.
• When a signal is input into the monitor for the first time or when a resolution or vertical/horizontal
scan frequency that has not been used before is set, the monitor will adjust automatically (only
for signals with a resolution of 800 x 600 (SVGA) or higher).