Eizo FlexScan S1934 19" 5:4 Square IPS Monitor - Manual (Page 12)

2 | Basic Adjustment/Setting
12
By switching the color mode according to the purpose and contents of the display, you can
display images in an appropriate manner.
2.3.1 Color Modes
Color mode Purpose
User1 / User2 Select either of these modes to set a user-defined display mode.
sRGB This mode is suitable for matching color reproduction with peripheral devices
that support sRGB, such as when printing photos taken using a digital
camera.
Paper This mode uses color tones and contrast similar to that of paper to produce a
printed paper effect. It is suitable for displaying images from media such as
books and documents.
DICOM Select this mode to simply display digital imaging for medical based on
DICOM® Part 14. "EcoView Settings" and "Color" become invalid, and cannot
be adjusted or set.
Attention
• This is not intended to be used for diagnostic purposes.
Note
• In Paper mode, the amount of blue light emitted from the screen is reduced by changing the
color tone and controlling the brightness.
2.4 Conserving Energy
This monitor is equipped with EcoView functions to enable users to conserve energy.
If you use Auto EcoView, which is one of the EcoView functions, the screen brightness is
automatically adjusted according to the ambient brightness.