Eizo FlexScan S1934 19" 5:4 Square IPS Monitor - Manual (Page 13)

Basic Adjustment/Setting | 2
13
Note
• The power saving level (Power Reduction, CO
2
Reduction, and Eco Performance Level) can be
checked on the "EcoView Settings" menu. The more indicators that light up representing the Eco
Performance Level, the higher the power saving level attained.
– Power Reduction: the reduction in the backlight’s power consumption as a result of the
adjusted brightness value.
– CO
2
Reduction: converted from the "Power Reduction" value, this is an estimate of the
quantity of CO
2
emissions reduced when using the monitor for one hour.
• The numeric value is a result of a calculation that based on the default setting value (0.000555t-
CO
2
/kWh) determined by a Japanese ministerial ordinance (2006, Ministry of Economy, Trade
and Industry, Ministry of Environment, Civil Code Article 3) and may differ depending on the
country, year, or other elements involved.
Auto EcoView
Settings: "On" / "Off"
The ambient light sensor on the front of the monitor detects the ambient brightness to
automatically adjust the screen brightness to a comfortable level using Auto EcoView.
The power consumption of the backlight can be curtailed by adjusting the brightness to an
appropriate level.
This function can also mitigate eye strain and tiredness caused by a screen that is too bright
or too dark.
Note
• Be careful not to block the ambient light sensor on the lower side of the monitor when using Auto
EcoView.
• Even when Auto EcoView is set to "On", you can change the brightness of the monitor using the
operation switches ( ) on the front of the monitor or in the color adjustment settings. The
manner in which Auto EcoView changes the brightness will also vary depending on the value
you set.
• When "DICOM" is selected for the color mode, the Auto EcoView setting is turned "Off".
2.5 Adjusting Brightness
Settings: "0" to "100"
The brightness of the screen can be adjusted to suit the installation environment or personal
preference.
The screen brightness is adjusted by changing the brightness of the backlight (light source
from the LCD back panel).