When color mode is – Eizo ColorEdge CS2400S 24.1" Monitor User Manual

Page 20

3 | Advanced Adjustments/Settings

Note

• The diagrams shown above are conceptual diagrams, and they do not display the actual color

gamut of the monitor.

• This setting will be disabled if "Native" is selected at

Advanced Settings - Gain

Settings: "0" – "2000"

The brightness of each color component red, green, and blue is called Gain. The
chromaticity of "white" can be changed by adjusting the gain.

Note

• Using this function may make some color gradations unavailable for display.

• The gain value changes according to the color temperature.

• When gain is changed, the color temperature is changed to "User".

Advanced Settings - 6 Colors

Settings: "-100" – "100"

The hue, saturation and lightness (brightness) can each be adjusted for the colors Magenta,
Red, Yellow, Green, Cyan, and Blue.

Reset

Resets any color adjustments for the currently selected color mode back to the default
settings.

3.2.2.2 When Color Mode is Advanced Mode (CAL1 / CAL2 / CAL3 / CAL4 / CAL5 / CAL6 /

CAL7)

Displays the color adjustment status using the color management software "ColorNavigator
7".

Color Mode

Settings: "User" / "Adobe®RGB" / "sRGB" / "CAL1" / "CAL2" / "CAL3" / "CAL4" / "CAL5" /
"CAL6" / "CAL7"

Select the desired mode according to the monitor application.