2 rear, Rear – Eizo ColorEdge CS2400S 24.1" Monitor User Manual
Page 10
1 | Introduction
10
1.2.2 Rear
5
2
1
6
12
3
9
10
11
4
8
7
1. Handle
This handle is used for transportation.
2. Security lock slot
Complies with Kensington's MicroSaver security system.
3. Lock button
Use this button to remove the monitor from the stand.
4. USB-A connector
(downstream)
Connects to a peripheral USB device (see
).
: USB 5Gbps
: USB 2.0
5. Cable holder
Holds the monitor cables.
6. Stand
*1
Adjusts the height and angle (tilt and swivel) of the monitor. The
monitor can also be rotated vertically.
7. Main power switch
Turns the main power on or off.
: On,
: Off
8. Power connector
Connects the power cord.
9. HDMI connector
Connects to an external device with HDMI output.
10. DisplayPort connector
Connects to an external device with DisplayPort output.
11. USB-C connector
(upstream)
Connects to an external device with USB-C output. This also
transmits the USB signal that is necessary for using software that
requires a USB connection.
12. USB-B connector
(upstream)
Connect using USB cable when using software that requires a USB
connection. The blue connector.
*1
An optional arm (or optional stand) can be attached by removing the stand section.