BenQ PhotoVue SW272U 27" 4K HDR Monitor User Manual
Page 45
45
2
Dial key
(If no menu is displayed)
• Turn right or left to adjust
Brightness
by default. To
change the default settings, press and hold for 3 seconds
to bring up the setup menu to change the default setting.
Alternatively, go to
Custom Key
>
Dial
on the monitor.
• Press to bring up the main menu.
• Press and hold for 3 seconds to bring up the setup menu
to change the default setting. Alternatively, see
Customizing your Hotkey Puck G3 on page 46
.
• (When the monitor is turned off) Press and hold for 3
seconds to turn on the monitor.
(On a menu)
• Turn right to scroll down the menu.
• Turn left to scroll up the menu.
• Press to confirm the selection.
(If a control bar is displayed)
• Turn right to increase the value.
• Turn left to decrease the value.
3
Exit key
• Returns to the previous menu.
• Press and hold for 3 seconds to turn on/off the monitor.
• Exits OSD menu.
4
Information key
Press to bring up the short
Information
menu. See
the current display settings on page 51
for more
information.
5
Shortcut key 1
• Press to switch to
Adobe RGB
(
Color Mode
) by default.
• Press and hold for 3 seconds to bring up the setup menu
to change the default setting. Alternatively, see
Customizing your Hotkey Puck G3 on page 46
.
6
Shortcut key 2
• Press to switch to
sRGB
(
Color Mode
).
• Press and hold for 3 seconds to bring up the setup menu
to change the default setting. Alternatively, see
Customizing your Hotkey Puck G3 on page 46
.
7
Shortcut key 3
• Press to switch to
B+W
(
Color Mode
).
• Press and hold for 3 seconds to bring up the setup menu
to change the default setting. Alternatively, see
Customizing your Hotkey Puck G3 on page 46
.
8
Channel switch
Switches the Hotkey Puck G3 to work with different
monitor when multiple monitors are connected. See
Working with more than one monitor (IR Channel Setting)
No.
Name
Description