BenQ PhotoVue SW272U 27" 4K HDR Monitor - Manual (Page 20)

20
Power delivery of USB-C™ port on your monitor
With the power delivery function, your monitor helps supply power to the connected
USB-C™ devices.
• A connected device needs to be equipped with a USB-C™ connector that supports
charging function via USB power delivery.
• The connected device can be charged via USB-C™ port even when the monitor is in power
saving mode. (*)
• The USB power delivery is up to 90W. If the connected device requires more than 90W for
operation or for boot up (when the battery is drained), use the original power adapter that
came with the device.
• The information is based on the standard testing criteria and is provided for reference.
The compatibility is not guaranteed as the user environments vary. If a separately
purchased USB-C™ cable is used, make sure the cable is certified by USB-IF and is
full-featured, with power delivery and video / audio / data transfer functions.
Installing the batteries to Hotkey Puck G3
USB-C™ Power Delivery
5V / 3A
9V / 3A
12V / 3A
15V / 3A
20V / 4.5A
*: Charging via USB-C™ in monitor power saving mode is available when the Quick Awake function is
enabled. Go to System > Quick Awake and select ON .
1. Turn the battery cover counterclockwise to remove
the battery cover.
2. Insert the provided two AAA Zinc-Carbon batteries
onto the battery holder properly.