BenQ PhotoVue SW272U 27" 4K HDR Monitor - Manual (Page 44)

44
The Hotkey Puck G3 and its effective range
1. Follow the instructions in Installing the batteries to Hotkey Puck G3 on page 20 to get
the Hotkey Puck G3 ready.
2. Place the Hotkey Puck G3 in front of the monitor. The IR sensor is located on the lower
right corner of the monitor with a range of 6 meters approximately at different vertical
and horizontal reception angles as illustrated. Place the Hotkey Puck G3 within the
effective range to obtain the best performance.
3. To operate with the Hotkey Puck G3, see Hotkey Puck G3 and its basic operations on
page 44 for more information.
Hotkey Puck G3 and its basic operations
Apart from the control keys, Hotkey Puck G3 also provides a quick way to control and
access the OSD menu.
Hotkey Puck G3 is designed for BenQ LCD Monitor exclusively and is available for compatible models only.
Use it with the bundled monitors only.
No. Name Description
1 Looping key • Press repeatedly to cycle through available settings.
• Press and hold for 3 seconds to bring up the setup menu
to change the default setting. Alternatively, go to Custom
Key > Looping Key on the monitor. See Customizing your
Hotkey Puck G3 on page 46 .
1 2
4
8
5 7 6
3