Connect the headphone, Connect the usb devices – BenQ PhotoVue SW272U 27" 4K HDR Monitor User Manual

Page 26

3. Connect the headphone.

You may connect the headphones to the headphone jack.

4. Connect the USB devices.

1. Connect the USB cable between the PC and the monitor (via the upstream USB port). This

upstream USB port transmits data between the PC and the USB devices connected to the

monitor. Note that this step is not required if the video source is from the USB-C™ input.

2. Connect the USB devices via other USB ports (downstream) on the monitor. These

downstream USB ports transmit data between the connected USB devices and the

upstream port.

The USB-C™ port on the monitor supports power delivery. See

for more information. If a separately purchased USB-C™ cable is used, make sure the cable is

certified by USB-IF and is full-featured, with power delivery and video / audio / data transfer functions.

Due to USB-C™ technology limitation, the USB transmission speed is determined only by the selected refresh

for more information.