Peerless-AV Neptune 55" 4K UHD HDR Smart IPS LED Outdoor TV (Partial Sun) - Manual (Page 29)

29 2021-12-22 #:180-9151-1
MENU OPERATION
Connection of Home IoT Devices
You can check and control the status of connected Home IoT devices.
1. Install the ThinQ Application on your smartphone.
2. Login to your ThinQ account and register your own ThinQ device.
3. Press the (HOME) button on the remote control and select Start Panel.
4. Press "Settings" at the top right to select Login.
•
If you are in an area where the ThinQ application is not serviced, the connection of the ThinQ
device will not be supported.
• If you are controlling the external device from your mobile app, you may not be able to control
the device from your TV. Exit the mobile application to control it from your TV.
1. You can easily control your device by pressing the desired operation
2. You can log in and out from the ThinQ account that is created on the mobile device
3. Edit List: You can rename, show / hide or change the order of the devices connected to IoT
Devices Home. Notification: if you activate it, you can receive notifications about the status
of Home IoT Device. Delete: You can delete the connected device. You can only delete certain
devices from other
4. You can consult the connection guide for IoT Domestic Devices. You can connect and display the
devices registered to your ThinQ account.
Once the device is connected, the card will be changed to a smaller size and appears at the bottom
of the device connection list.
•
Available settings vary by model and region.
• IoT devices that can be connected to a TV are subject to change without notice.
• Connectable ThinkQ devices and available functions may differ between mobile phone and TV.