Changing the wi-fi direct password – Epson WorkForce Pro WF-6090 Printer with PCL/PostScript User Manual
Page 36
You see this screen:
4.
Press the
OK
button to view the SSID (Wi-Fi network name) and password.
5.
Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the
LCD screen, and enter the password shown.
6.
Press the
OK
button to exit.
You see either the
AP
or
D
connection symbol on the LCD screen and should be able to print directly
to your product from your computer or device.
Note:
If the
AP
or
D
connection symbol is not displayed on the LCD screen, Wi-Fi Direct mode is not
enabled. Repeat these steps to try again.
Parent topic:
Related references
Changing the Wi-Fi Direct Password
You can change the Wi-Fi Direct password from the default to improve the security of your Wi-Fi Direct
connections.
Note:
If you change the Wi-Fi Direct password, you cannot use the built-in NFC functionality to connect
to the product. If you have already connected devices or computers to your product via Wi-Fi Direct, they
are disconnected when you change the password.
1.
Press the arrow buttons to select
Wi-Fi Setup
and press the
OK
button.
36