Epson WorkForce Pro WF-6090 Printer with PCL/PostScript User Manual

Page 32

Computer with a wireless interface

Computer

Internet

Ethernet cable (used only for wired connection to the wireless router or access point)

Selecting Wireless Network Settings From the Control Panel

Parent topic:

Wi-Fi or Wired Networking

Selecting Wireless Network Settings From the Control Panel

You can select or change wireless network settings using your product control panel.

To install your product on a wireless network, follow the instructions on the

Start Here

sheet and install

the necessary software. The installer program guides you through network setup.

Note:

Breakdown or repair of this product may cause loss of network data and settings. Epson is not

responsible for backing up or recovering data and settings during or after the warranty period. We
recommend that you make your own backup or print out your network data and settings.

Press the arrow buttons to select

Wi-Fi Setup

and press the

button.

You see this screen:

Select

Wi-Fi Setup Wizard

and press the

button.

Note:

If you need to disable the wireless network to set up your product on an Ethernet network,

press the down arrow button, select

Disable Wi-Fi

, and press the

button. Then follow the

instructions on changing to a wired network connection in this guide.