Epson DC-13 Document Camera - Manual (Page 50)

•
Images must be DCF-compliant, JPEG files to be displayed, such as
from a digital camera. Do not edit the images, as this may change their
format and prevent them from being displayed.
•
Images must be named using the format ABCD1234.JPG, where ABCD
is any combination of upper- or lowercase letters and 1234 is any
combination of numbers. (For example: Pict0001, Pict0002)
•
Images must be placed in a folder named DCIM\123ABCDE, where 123
is any combination of numbers and ABCDE is any combination of
upper- or lowercase letters. If this folder structure does not exist, first
create a folder named DCIM, then create a folder within it with the
desired name. (For example: 100EPSON)
Image files do not have the correct time stamp
The document camera does not have a built-in clock. Therefore, when you
view captured image files from your computer, the actual time they were
created is not displayed.
Problems Connecting a Laptop
If images are not displayed from a PC laptop, you need to set up the laptop
to display on an external monitor. If images are not displayed from a Mac
laptop, you need to set up the laptop for mirrored display. (See your laptop
manual for details.)
•
Windows
Hold down the laptop's Fn key and press the key labeled with or
CRT/LCD . (See your laptop manual for details.) Wait a few seconds for
an image to appear. To display on both the laptop's monitor and the
projector, try pressing the same keys again. If the same image is not
displayed by the laptop and projector, check the Windows
Display
utility to make sure the external monitor port is enabled and extended
desktop mode is disabled. (See your computer or Windows manual for
instructions.)
•
Mac
From the Apple menu, open the System Preferences utility and select
Displays . Click the Arrangement tab and select the Mirror Displays
checkbox.
Problems and Solutions
50