Epson DC-13 Document Camera - Manual (Page 40)

Setup Item Explanation/Select
Reset Resets the Image menu settings to the default values.
* Default setting at time of purchase
Function Menu
Setup Item Explanation/Select
Output Resolution Sets the output resolution when connecting a computer cable to the Display Out port.
Auto * : Sets automatically according to the resolution of the image device.
XGA 1024x768
WXGA 1280x800
WXGA 1360x768
SXGA 1280x1024
Full HD 1920x1080
HDMI Output Sets the output resolution when connecting an HDMI cable to the HDMI port.
Auto * : Sets automatically according to the resolution of the image device.
SDTV (480p)
HDTV (720p)
HDTV (1080p)
Mic. Volume Sets the volume for the internal microphone.
HDMI Link When image devices that support the HDMI CEC standard are connected to the document camera, operations for the
document camera and the image device can be linked together.
HDMI Link : Set to On * to enable the HDMI Link function. The changes are enabled when you turn off the document
camera.
Power On/Off Link : When this is set to On , the connected device turns on when the document camera is turned on.
Also, when the connected device is turned off, the document camera turns off. The default setting is Off .
Sleep Mode Operation settings when the document camera is inactive.
On : The power automatically turns off if the document camera is inactive for a certain amount of time.
Off * : The power remains on even if the document camera is inactive for a certain amount of time.
On-Screen Menu Table
40